[928uk] Cup wing mirrors

[John Speake]

  Hi all,

  I have a faulty drivers mirror. The electric adjuster will move the mirror backwards and forwards, but not left to right. I can hear the motor in operation for all directions. Can someone tell me how to get the glass off so I can take a look at what might be loose/disconnected back there.

  I did have a go at it yesterday but without success and gave up before I broke something.



  Thanks in advance

  Steve

  >>>>>>>>>>>>>>>

  Steve,

  This is what I have copied from Pirtle's 928 tips listing----------------- but the problem may be the mirror switch itself.





  "Shine a flashlight up the hole in the bottom of your mirror and you'll see
  that there's a piece of plastic with slots in it.  This is actually the
  bottom part of a ring that goes around the back of the mirror glass,
  which, when rotated 5 degrees or so, will release the glass. Once you see
  what it looks like, stick a small slotted screwdriver into the hole into
  one of the slots and try to shift the ring one direction or the other
  (apply force upward to keep screwdriver in one of the slots and then move
  it sideways to shift the ring).

  This is *much* easier to understand once you get the mirror glass out and
  see the locking ring on the back of it. "


  John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.928.org.uk/pipermail/928uk/attachments/20040705/9a2f3b39/attachment.html