[928uk] 32v Head removal

[Paul R Smith in NZ]

I know someone who very recently got the flywheel lock tool from 928
Specialists http://www.928gt.com/
Its on their website at US$46.46

Smiffy

----- Original Message ----- 
From: "Paul Lacey" <paul at paullacey.com>
To: <928uk at 928.org.uk>
Sent: Friday, April 09, 2004 1:41 AM
Subject: [928uk] 32v Head removal


> Hi all,
> I've studied the manual etc. but cannot see if it's possible to remove a
> cylinder head (32v) without removing the camshafts first - i.e. can all
> the head bolts be got at or are the cams in the way?
> Next question applies if the answer to question 1 is no - Can the cams
> be removed without the special tools shown in the manual i.e. by
> progressive loosening of the cam bearing caps?
> Thanks as always for any advice here.
> P.S. Thanks for the advice on obtaining a flywheel lock tool. I did try
> Guildford OPC but was told I'd have an 8 week wait.... Unacceptable for
> me. Berlyn don't sell any tools and even 928 Intl. don't have any. I'll
> continue the quest :-)
>
> Paul
> '85 928S2 Turquoise
> '90 928GT Baltic Blue
>
>
> _______________________________________________
> 928uk mailing list
> 928uk at 928.org.uk
> http://www.928.org.uk/mailman/listinfo/928uk
> 928.org.uk
>
>