[928uk] 32v Head removal

[Paul Lacey]

Hi all,
I've studied the manual etc. but cannot see if it's possible to remove a
cylinder head (32v) without removing the camshafts first - i.e. can all
the head bolts be got at or are the cams in the way?
Next question applies if the answer to question 1 is no - Can the cams
be removed without the special tools shown in the manual i.e. by
progressive loosening of the cam bearing caps?
Thanks as always for any advice here.
P.S. Thanks for the advice on obtaining a flywheel lock tool. I did try
Guildford OPC but was told I'd have an 8 week wait.... Unacceptable for
me. Berlyn don't sell any tools and even 928 Intl. don't have any. I'll
continue the quest :-)

Paul
'85 928S2 Turquoise
'90 928GT Baltic Blue