[928uk] Gaskets

[Richard Armstrong]

>
>  Without wishing to pester the man too much on how to do the job, can
>  anyone tell me exactly what gaskets I will need? I it as simple as an
>  inlet manifold gasket and two cam cover gaskets or do I need to buy
>  others? If so what others?
>  My car 88 S4 auto.
>  Steve

I don't think there are any differences in your '88 S4 and my '91 S4
re-manifold gaskets
                                                Tot
I used  928.    107.313.02      Hose            £18.30
                107.603.00      hose            £27.60
                110.174.09      hose            £18.30
                110.580.02      Gasket  x2      £29.30 Manifold
                110.633.00      hose            £10.90
                110.637.04      Gasket  x2      £5.50 lower plenum
                110.713.01      Gasket          £7.70
                110.714.01      Gasket          £7.70
                606.144.00      Knock sensor    £46.20

These are all the hoses and gaskets required for the inlet manifold,
including the side covers and lower plenum. My hoses turned out to be
ok, but I changed them anyway as I was hunting down an idling problem.
If your knock sensor leads are cracked at all I would change them, it is
JUST about possible to do the front one with the manifold in place, but
the back is such a pain to get at it's almost easier to take the top
off. I have a load of digi pics if you are interested.
The other bugger is the connector to the start valve, inbetween the
manifold and the plenum. Thin fingers are recommended !

These are OPC prices (I didn't have time to shop around) The knock
sensor is half price from Bosch!
Richard